:	May 14, 2004

.

Remove the headlamp switch.

.

Remove the stoplamp switch.

.

Remove the instrument panel access panel.   Release the 2 clips.

.

Remove the brake pedal bracket.   Release the wiring harness clip.   Remove the 4 Torx bolts.

.

Remove the brake pedal clevis pin.   Remove the clip.

.

Remove the brake pedal.   Remove the nut and bolt.

.

:   Do not disassemble further if the component is removed for access only. Remove the brake pedal pad.

.

Install the brake pedal pad.

.

Install the brake pedal.   Clean the component mating faces.   Tighten the nut and bolt to 45 Nm (33 lb.ft).

.

Install the brake pedal clevis pin.   Install the clip.

.

Install the brake pedal bracket.   Tighten the Torx bolts to 10 Nm (7 lb.ft).   Secure the wiring harness.

.

Install the instrument panel access panel.   Secure with the clips.

.

Install the stoplamp switch.

.

Install the headlamp switch.